WEICON 302-70 Adhesive for screws and studs

52,40 zl PLN 65,68 zl PLN Save 13,28 zl PLN

Tax includedShipping calculated at checkout

Only 13 left!

Atest: NSF 61 Systemy wody pitnej, NSF H1 spożywczy do kontaktu z żywnością

Cechy szczególne: Klej/uszczelniacz jednoskładnikowy

Typ produktu: Klej anaerobowy

Zastosowanie: Napędy śrubowe


Good adhesive with increased viscosity and medium strength, removable and clean for screws and pins. Useful for food production. It has drinking water and DVGW approvals.

Selection table for WEICONLOCK anaerobic bonding adhesives


  • For securing screws
  • For securing pins

Features and Benefits:

  • increased viscosity
  • medium strength
  • removable
  • drinking water and DVGW approvals

Technical data

Viscosity at +25 °C 500 nt mPa s
properties Fluorescent
Shelf life 24th month
Threaded connection to M 20 R ¾
Color green
Initial strength at room temperature 10 - 20 mins.
Final strength at room temperature 3 - 6 hours
Thermal resistance -60 to +200 °C
ISSA code 75.628.07/08/09
IMPA code 812915/16/17

Application method:

For optimal results, the parts to be installed must be degreased and cleaned, e.g. with WEICON Surface Cleaner (if necessary, the surfaces may be machined). WEICONLOCK can also be used on uncleaned surfaces, e.g. on screws as delivered. However, the cleaner the surface is, the better the results are achieved.

WEICONLOCK is dispensed evenly onto the surface thanks to the PEN system; avoid direct contact of the dispensing tip with metal. Apply WEICONLOCK evenly to the thread. Install and tighten parts. Do not put back into the bottle WEICONLOCK that has already been in contact with metal. Even the smallest metal particles lead to the hardening of the material in the bottle. In serial production, we recommend the use of dosing devices.

Available packages:

[ 10ml ][ 20ml ][ 50ml ][ 200ml ]