
Weicon Easy-Mix HT 180 - epoxy adhesive
High temperature, shock and impact resistant WEICON Easy-Mix HT 180 is a 2-component epoxy adhesive. Easy-Mix HT 180 is heat-resistant up to +180°C (+356°F); temporarily up to +230°C (+446°F). The adhesive is very viscous and stable, also suitable for vertical applications. The adhesive is particularly suitable for bonding composite materials, also for plastics, ceramics, glass or wood. The high temperature resistance enables the bonding of components that are subsequently thermally coated (powder coated).
The Easy-Mix D 50 dispensing gun is required to process Easy-Mix products in 50 ml containers.
Application:
- For low energy plastics
- For composite materials
- For glass
- For ceramics
- For wood
- After gluing the elements, they can be thermally painted.
- After gluing the elements, they can be powder coated.
- Shelf life 24 months at +20°C in a dry, dark place
-
Shelf life 6 months if these storage instructions are not followed
Features and Benefits:
- Resistant to high temperatures up to +180°C / +356°F
- Resistant to high temperatures for short periods up to +230°C / +446°F
- Shock resistant
- Impact resistant
- High adhesion
- Sticky and stable
- Color black
- Two-component glue
Technical data (data source TDS_10650850 pdf)
Base | Epoxy resin, filling: ceramic |
Color after curing |
black |
Resin/hardener mixing ratio | 2:1 |
Viscosity of the mixture | 1.1 g/cm³ |
Mixture viscosity +20 °C (+68 °F) | Paste |
Application temperature | +10 to +40 °C |
Properties | Paste, filling the gaps |
Open time at +20°C | 1 hour |
Strength 35% | 120 mins |
Mechanical load transfer (50% strength) | 4 hrs |
Final strength (100%) | 24 hrs |
Maximum gap | 4mm |
Average resin strength DIN EN 1465 | |
Pressure | 52 Mpa |
Adhesion | 27 Mpa |
Bending | 46 Mpa |
Tg at 120°C | 44.7°C |
Tg room temperature | 54.4 °C |
E-Module | 2.300 - 2.700 Mpa |
Shore D hardness | 80 |
Average shear strength DIN EN 1465 | |
Galvanized steel | 8N/mm² |
Sandblasted steel | 23 N/mm² |
Sandblasted aluminum | 13 N/mm² |
V2A polished | 24 N/mm² |
Hard PVC rough | 11 N/mm² |
CFK | 22 N/mm² |
Linear shrinkage | 0.3% |
Thermal resistance | -50 to 180 short-term up to +230 °C |
Thermal resistance (23 °C) | 0.172 mm²/s |
Thermal conductivity | 0.26 W/m K |
Thermal specification | 1.335 J/(g K) |
Characteristic properties | 2.48 10^11 ohm |
Curing temperature | +10 to +50 °C |
Product number:
|
10044884 |
EAN
|
4024596067021 |
Application method:
The conditions for perfect bonding are clean and dry surfaces (cleaning and degreasing with WEICON Surface Cleaner). Smooth surfaces should be machined. WEICON Easy-Mix products can be applied directly from the double cartridge using a static mixer. Discard the first 5 cm of the adhesive. The adhesive is applied from one side. The open times given refer to a 10 ml mixture at room temperature. Larger quantities will cure faster due to the thermal reaction typical of epoxy resins. Higher temperatures shorten the curing time and the open time of the adhesive processing. (as a guide - each 10°C above room temperature shortens both times by 50%). At temperatures below +16°C the open time and the curing time are extended. From a temperature of approx. +5°C no reaction occurs.
Safety and health
When using WEICON products, please observe the physical, safety, toxicological and ecological data and regulations in our safety data sheets (www.weicon.de)
Available packaging and accessories:
[ 50g ] [ Easy-Mix D 50 Dosing Gun ] [ Nozzle ] [ Dosing tips ]
Product title
Vendor
€19,99 EUR | €24,99 EUR
Product title
Vendor
€19,99 EUR | €24,99 EUR
Product title
Vendor
€19,99 EUR | €24,99 EUR
Product title
Vendor