Molykote D-7409 Hot curing coating - 25kg

Name: Molykote D-7409 Hot curing coating - 25kg
Brand: Molykote
SKU: rd7409.25kg
Price: 14843.59 PLN
Availability: OutOfStock

14.843,59 zl PLN Save -14.843,59 zl PLN

Tax includedShipping calculated at checkout

Sold Out

Baza chemiczna: Spoiwo Organiczne

Cechy szczególne: Dobra ochrona przed korozją, Dobre zapobieganie frettingowi, Wydajność w niskich temperaturach, Wydajność w wysokich temperatur., Wysoka nośność duże obciążenia

Nazwa kategorii: Powłoki Przeciwcierne

Niska temperatura: mniej niż -50°C

Pojemność opakowania: 25kg

Przemysł: Motoryzacja, Obróbka i produkcja metali, Przemysł ciężki, Transport

Skład Ciała Stałe: Grafit, MoS2 dwusiarczek molibdenu

Wysoka temperatura: +250°C do 300°C

Zastosowanie: Gwinty i połączenia gwintowane, Montaż i docieranie, Podwozie, Pompy, Powłoki, Prowadnice ślizgowe, Próżnia, Łańcuchy

MOLYKOTE® D-7409 Anti-friction coating

Dry Heat-curing grease

Key properties

Heat-curing anti-friction coating filled with molybdenum disulfide and graphite, higher load capacity due to resin selection.

Apps

For metal/metal joints with slow to moderately fast movements and medium to heavy loads. Suitable for heavily loaded sliding areas with low sliding speeds, oscillating movements or intermittent work. For permanent lubrication at high temperatures and where oils and greases cannot be used. Used successfully on piston rings and tappets of combustion engines, magnetic armatures of vehicle starters, elements of bonnet locks.

Activation
closures
Shell
Gears, gearboxes and pumps
Vibration isolation from noise
Sliding bearings, bushings and bushings
Power screw drives
Guides and sliding tracks
Spring clamps
Threaded connections fasteners

Performance benefits

Excellent lubrication combined with anti-corrosion properties
High load capacity
High wear resistance
High temperature resistance
Resistant to oils, greases, solvents
Avoid fretting corrosion
Good chemical resistance
Good corrosion protection
Good fretting protection
Performance at low temperatures

Product Details

Product type	Anti-friction coatings
Technology	Organic binder, solids, solvent
Solid lubricants	MoS2, graphite
Curing temperature (C)	220
Low Temperature (C)	-70
high temperature (C)	300
Color	gray black

Usage

Surface preparation

Carefully clean and degrease the surface to be covered with the Anti-Slip Coating.

Recommended pre-treatments: phosphating or sandblasting (180 grit); both pre-treatments enhance the durability and life of the Coating.

How to apply

Stir the Anti-Corrosion Coating thoroughly before and during use, apply by spraying (3 to 5 bar [45 to 75 psi] air pressure), dipping, spinning or brushing. The surfaces should be covered as evenly as possible.

Recommended dry film thickness: 3 to 20 μm.

The product applied in this way should be cured at a temperature of 150-220°C.

Coverage

When applied to a 10 μm dry film, the thickness of Molykote ® D-7409 Anti-friction Coating has an average coverage of 16 m2 / kg (this value does not take into account the losses generated during the application process).

Thinning

The recommended thinner is Molykote® 7415.

Hardening

Typical curing conditions are: 30 minutes at 220°C