FLUID Wax 100ml EVIL Lubricants chain wax emulsion
Fluid Wax is an emulsion of liquid wax for lubricating bicycle chains
Polish Product Evil Lubricants
Bicycle chain lubrication wax products are products that are designed to protect the chain links from oxidation, but also to create a protective patina that will prevent dirt from easily sticking. In addition, the resulting protective film creates a kind of barrier between the chain and dirt, allowing easier removal during cleaning.
Lubricating a bicycle chain with liquid wax is an old way of maintaining bicycle drive components
Fluid Wax chain wax emulsion has been designed to lubricate like wax, but have the advantages and ease of application of oil drops.
It consists of several types of waxes, including microcrystalline wax, inhibitors, e.g. of corrosion, an emulsifier that thickens the liquid wax upon contact with air, and nanoparticles of white solid lubricants, which have a higher density and always settle at the bottom of the bottle during aging. For this reason, Fluid Wax should be mixed by shaking the bottle before each application.
Features and Benefits
- improved lubrication with additives
- reduces wear of drive parts
- ease of waxing (smooth droplet application)
- chain protection against dust and dirt sticking
- It is suitable for all weather conditions, even rain and humidity
- reduces drive noise
- the world's only flexible formula of chain wax without the need to melt
Application
Fluid Wax grease is recommended for MTB, triathlon, gravel, racing and e-bikes operating in wet and dry conditions.
Properties of Fluid WAX liquid wax
Standard | Contents | Unit | result |
CTM0176 | color | white | |
Composition: several types of waxes, including microcrystalline wax, inhibitors, e.g. corrosion, emulsifier that thickens liquid wax upon contact with air, non-particles of white solid lubricants | |||
DIN 51 757 | Density at 20°C | g/ml | 0.82 |
DIN 51 562 | Viscosity of wax (mixed at 0 ° C) | cSt | 220 |
DIN 51 562 | Viscosity of wax (mixed at 35° C) | cSt | 10 |
Recommended temperature range for application | °C | 10 to 35 | |
The temperature at which hardened wax melts | °C | 60 | |
Water temperature washing off the hardened wax | °C | 70 | |
DIN 51 350 pt.4 | Weld load | N | 1200 |
DIN 51 350 pt.5 | Load capacity mm | mm | 0.7 |
Flash point, °C -> 200 | °C | > -10 | |
temperature of self-ignition | °C | approx. 300 |
How to use:
- Clean the chain
- Before use, shake the bottle until a uniform emulsion structure is obtained
- Apply a layer of emulsion drops of lubricant along the entire length of the chain wax
- After lubrication, rotate the drive system several times
- Remove excess liquid wax with a dry cloth
- Leave the chain for 4 to 8 hours until the wax is fully hardened
- After this time, you can turn the drive system again and remove any excess hard wax that has peeled off.
Products with similar composition or use:
X-SauceEcoLube Classic Chain WaxLubricant, WaxFlowerpower, BlubDry Lube, TUNAP SPORTS Chain Wax, CeraBikeWaxLubricant, Muc-Off C3 CeramicDry, Squirt Chain Wax, MoltenSpeed Wax, WendWax-ON Chain Lube, RunawayBike Hot, Bananaslip Tungsten AllWeather Lube, Lubrificante Smoove, SILCA Super Secret Chain lube, CeramicSpeed UFO Drip, JuicEvil Lubricantss Chain Wax, Żefal extra drychainwax, Lube BikinventionsSquirt, MomumMicWax Lube, Finish LineCeramicWaxlube.
Product title
Vendor
19,99 zl PLN | 24,99 zl PLN
Product title
Vendor
19,99 zl PLN | 24,99 zl PLN
Product title
Vendor
19,99 zl PLN | 24,99 zl PLN
Product title
Vendor