HARD Wax Chain wax lubricant 100ml

Ceramic wax that hardens upon contact with air.

Polish Product Evil Lubricants

Chains waxed with Hard Wax grease are extremely resistant to contamination. This ensures that the chain and drive system run cleanly and for a long time, especially in difficult conditions.

The waxes used in the composition are a special formula of paraffin, PTFE and solid lubricant. Paraffin is a carrier and barrier - it carries PTFE and ceramic lubricant particles.

This hybrid wax composition provides long-term lubrication and protects the chain from excessive damage.

Features and Benefits

• improved additive lubrication
• wear of drive parts is reduced
• ease of waxing (liquid droplet application)
• chain protection against dust and dirt adhesion
• it is suitable for all weather conditions, even in rain and humidity
• reduces drive noise
• the world's only flexible chain wax formula without the need for melting

Application

Hard Wax grease recommended for MTB, triathlon, gravel, racing and e-bike chains operating in wet and dry conditions. When riding in rain/wet conditions, the chain should be re-waxed after prolonged contact with water.

Properties of Hard WAX wax grease

How to use:

1. Clean the chain
2. Prepare Hard WAX grease before applying
   The bottle of wax should be heated to a temperature of about 50 degrees (water bath) so that the product becomes completely liquid.
3. Apply the grease dropwise (remembering to mix thoroughly by shaking the bottle) along the entire length of the chain with a new layer of wax grease.
4. After lubrication, turn the drive system several times.
5. Remove excess liquid wax with a dry cloth
6. Leave the chain for 4 to 6 hours for the wax to fully harden.
7. After this time, you can turn the drive system again and remove any excess flaked hard wax.